Wireless Local Loop (WLL)

Wireless Local Loop (WLL)
Wireless local loop (WLL) service refers to the distribution of telephone service from the nearest telephone central office to individual customers via a wireless link. In some cases, it is referred to as “the last mile” in a telephone network. This term is a bit misleading, though, because the coverage area of a WLL system may extend many miles from the central office.

Competitive local exchange carriers (CLEC) are competitors to the incumbent local exchange carriers (ILECS) and are likely to use WLL systems to rapidly deploy competing systems. If CLECs do not use wireless systems, they must either pay the existing phone company for access to the local loop (resale) or dig and install their own wire to the local customers. Many countries, that do not have large wired networks such as the United States, are using wireless local loop as their primary phone system.

Figure 1 shows a wireless local loop system. In this diagram, a central office switch is connected via a fiberoptic cable to radio transmitters located in a residential neighborhoods. Each house that desires to have dial tone service from the WLL service provider has a radio receiver mounted outside with a dial tone converter box. The dial tone converter box changes the radio signal into the dial tone that can be used in standard telephone devices such as answering machines and fax machines. It is also possible for the customer to have one or more wireless (cordless) telephones to use in the house and to use around the residential area where the WLL transmitters are located.


Figure 1: Wireless Local Loop

The most basic service offered by wireless local loop (WLL) system is to provide standard dial tone service known as plain old telephone service (POTS). In addition to the basic services, WLL systems typically offer advanced features such as high-speed data, residential area cordless service, and in some cases, video services. To add value to WLL systems, WLL service providers will likely integrate and bundle standard phone service with other services such as cellular, paging, high speed Internet, or cable service.

WLL systems can provide for single or multiple-line units that connect to one or more standard telephones. The telephone interface devices may include battery back up for use during power outages. Most wireless local loop (WLL) systems provide for both voice and data services. The available data rates for WLL systems vary from 9.6 kbps to over several hundred kbps. WLL systems can be provided on cellular and PCS, private mobile radio, unlicensed cordless, and proprietary wideband systems that operate the 3.4 GHz range.

2 comments:

simplecall said...

I want to know how to make international calls from multiple registered numbers without using lengthy pin, password and calling cards numbers,Easy with SimpleCall. It would be help full for me.

Rishi said...

very useful information thank you for sharing it.

Videocon Telecom cuts national roaming tariff
After national carriers, such as Vodafone India, Bharti Airtel and Idea Cellular, Videocon Telecom that has less than a crore subscribers on Friday reduced national roaming tariff, in line with telecom regulator Trai guidelines.The drop in tariff is to the extent of 75% on local and national SMS; 40% on all incoming calls; and 23% and 20% on STD and local calls made while roaming, the telecom firm said in a statement.

Telecom Made Simple

Related Posts with Thumbnails